Exported Files

The exported file is a compressed file archive containing a binary file with the settings, as well as two character-separated values (csv) files with results and events.

When Settings and configurations is chosen no file with results or events will be exported into the archive.

Exported information

File

Description

PFExport__<Controller name>_<Time stamp>_Events.csv

A semicolon-separated file containing the following information:

  • Severity: Type of event

  • Date and time: A time stamp of when the event occurred

  • Code: The event ID

  • Description: A short description of the event

  • Virtual station: Virtual station ID

PFExport__<Controller name>_<Time stamp>_Results.csv

A semicolon-separated file containing the following information:

  • Type of tightening: Multi tool, single tool, single tool batch, or multi tool batch.

  • Virtual station name

  • Unique tool identifier

  • VIN: Vehicle Identification Number

  • Date and time: A time stamp of when the result occurred

  • Batch sequence name: The batch sequence name

  • Batch sequence counter: The batch number in the batch sequence

  • Batch count: Actual tightening in the batch

  • Bolt name

  • Status: Tightening or loosening status OK or NOK

  • Status additional info: A short description of the result status

  • Tightening program/multistep name

  • Stopping error

  • Errors

  • Failing step

  • Target torque: The target torque value

  • Final torque: The final torque value

  • Target angle: The target angle value

  • Final angle: The final angle value

  • Rundown angle: The rundown angle value

  • Residual torque correlation factor [%]: Factor to compensate for the difference between residual torque and dynamic torque when using TurboTight.

  • Elapsed time [s]

  • Angle low limit [deg]

  • Torque low limit [Nm]

  • Torque high limit [Nm]

  • Number of pulses

  • Current at shutoff [A]

  • TrueAngle compensation [deg]

  • Time to rundown complete [ms]

  • Time to final torque [ms]

  • target text

ExportInfo.txt

Information about the controller set-up and controller software.

settings/settings.bin

A binary file containing all tightening programs and Batch settings, Accessory configurations, and controller settings such as: Language, Torque units, data, Date and time, and Result appearance.