Table of Contents
Introduction
loading...
Installation and Upgrade
loading...
Configuration
Working with the Tightening Tab
loading...
Working with the Batch Sequence Tab
loading...
Working with the Sources Tab
loading...
Working with the Tool Tab
loading...
Working with the Virtual Station Tab
loading...
Working with the Configurations Tab
loading...
Working with the Controller Tab
Intelligent Application Module
Software
loading...
Hardware
loading...
Export/Import
loading...
Synchronized Tightening
User Interface for Synchronized Tightening
Configuring Synchronized Tightening
Setting up Synchronized Tightening (hardware)
Synchronized Tightenings
Synchronized Tightening Results
Synchronized tightening Signals
Input Signals
Output Signals
Input Signals: Sub-signals
Channel Command - 10054: Sub-signals
Continue Step
Force Bolt ID
Force Pset
Inhibit No Result
Inhibit NOK Result
Inhibit OK Result
Set Zero Position
Output Signals: Sub-signals
loading...
Tool Box for Synchronized tightening
Synchronized Tightening CAN Accessories
Working with the Settings Tab
loading...
Operation
loading...
Reports and Statistics
loading...
Troubleshooting and Service
loading...
Reference
loading...
Glossary
Video Gallery
loading...
Power Focus 6000
Configuration
Working with the Controller Tab
Synchronized Tightening
Synchronized tightening Signals
Input Signals: Sub-signals
Channel Command - 10054: Sub-signals
Force Pset
Force Pset
Name in SoftPLC
: CHANNEL_COMMAND_FORCE_PSET
Value Type
Size Min [bit]
Size Max [bit]
Integer
1
8
Smart Connected Information
Download
Download All For Offline Use – PC Only
Print
Print this Topic
Print this Section
Print All
Language
US-English (en-US)
Deutsch (de-DE)
Español (es-ES)
Français (fr-FR)
Italiano (it-IT)
日本語 (ja-JP)
한국어 (ko-KR)
Slovenčina (sk-SK)
Svenska (sv-SE)
简体中文 (zh-CN)
Language
US-English (en-US)
Deutsch (de-DE)
Español (es-ES)
Français (fr-FR)
Italiano (it-IT)
日本語 (ja-JP)
한국어 (ko-KR)
Slovenčina (sk-SK)
Svenska (sv-SE)
简体中文 (zh-CN)
Print this Topic
Print this Section
Print All