Viewing Tool Information
If not in the main menu, press and hold the Select button until the main menu shows.
Use the Up- and Down buttons to cycle through the main menu items to the Tool menu.
Press the Select button to open the Tool menu.
Use the Up- and Down buttons to view the tool information.
The Tool menu provides the following information:
Tool Information | Description |
|---|---|
Serial no | Tool serial number |
Software version | Software version installed on the tool |
Model | Tool model designation |
Production date | Date when the tool was manufactured |
Ordering number | Product number for ordering the tool |
Max torque | Tool's maximum torque |
Max speed | Tool's maximum speed |
Gear ratio | Gear ratio of the tool shaft |
Remaining tightenings | Approximate number of tightenings left before service of the tool is required |
Service date | Date of the last service performed on the tool |
Calibration date | Date the tool was last calibrated |
Next calibration date | Date when the tool should be calibrated next |
