1. BCP BL-2L-I06
2. Operation
3. Operating Instructions
4. Operating the Tool

Operating the Tool

1. Make sure that the switch (CW/CCW) is in the clockwise position.
   Release the trigger to change the switch.

   

2. Push the trigger to start the tool.

   

3. Run the tool until the preset torque is reached and the clutch is released.

4. A click sound is heard, the LED is green and the motor is turned off.

The LED on the tool notify the tightening status after each tightening. There is no notification if the tool is run in counterclockwise mode.