Configuring Result Presentation Settings

The Result Presentation Settings window allows a user to show the final torque without the PrT compensation value included, and PrT compensation value on the Live results.

Configure the Result Presentation Settings Window

  1. On the Home view, select the Configurations tab. Then, on the left, select General Virtual Station.

  2. In the wanted Configuration window, select Edit.
    The Edit Configuration screen appears.

  3. In the Result Presentation Settings window, set the relevant switches to ON or OFF depending on the wanted results.

    If the Show PrT Compensation Value on Live Result switch is set to ON, the Live Results window displays the PrT compensation value.

    If the Show Final Torque with PrT Compensation switch is set to ON, the Live Results window displays the final torque with the PrT compensation included.

    Setting the switches in the Results Presentations Settings window to either ON or OFF has no impact unless:

    • The multistep program has a tightening step including a Prevailing Torque step monitor with the Compensation switch set to ON.

Result Presentation Settings

Here are the different configuration options in the Results Presentations Settings window.

Show PrT Compensation Value on Live Result: ON

Show Final Torque with PrT Compensation: ON

Show PrT Compensation Value on Live Result: ON

Show Final Torque with PrT Compensation: OFF

Show PrT Compensation Value on Live Result: OFF

Show Final Torque with PrT Compensation: ON

Show PrT Compensation Value on Live Result: OFF

Show Final Torque with PrT Compensation: OFF

Point and click at items on image to see if there is more information:
Point and click at items on image to see if there is more information:
Point and click at items on image to see if there is more information:
Point and click at items on image to see if there is more information:
In this Section