1. QA Supervisor
2. Features
3. Settings
4. Viewing/editing notifications
5. Notifications parameters

Notifications parameters

• Location (*): select the area of the plant where to send the event notification. By default it is set to the is the location of the user.

  To change the default location:

  Click Location icon ().

  In the Location dialog box, select the area of the plant.

  Then, click Apply.

Inspection Type

• Tool check: click on switch to enable/disable the notification event for Tool check inspections.

• Joint check: click on switch to enable/disable the notification event for Joint check inspections.

• Visual check: click on switch to enable/disable the notification event for Visual check inspections.

• Dimension: click on switch to enable/disable the notification event for Dimensional inspections.

• By part grouping: click on switch to enable/disable the notification event for By part grouping inspections.

Expiring filters

The following parameters are displayed only for the Inspection expiring notification.

If the Inspection expiring notification is enabled, at least one of the following Expiring filters must be set. The Expiring filters can be combined together.

• Expiry period %: by setting a percentage value from 50 to 99, a notification is sent when the inspection expiry period reaches the defined percentage value.

• Remaining days: by setting a number of days from 1 to 364, a notification is sent when the defined remaining days before expiration are reached.

• Remaining hours: by setting a number of hours from 1 to 72, a notification is sent when the defined remaining hours before expiration are reached.

• Expiry date: from the drop-down list, select between:

  • Today: by selecting this value, a notification is sent the day of the inspection expiration date.

  • Tomorrow: by selecting this value, a notification is sent the day before the inspection expiration date.

  • This month: by selecting this value, a notification is sent for the inspections expiring in the current month.

  • Next month: by selecting this value, a notification is sent for the inspections expiring during the next month.

Notification channels

• Online: click on the switch to enable/disable the notifications online.

  To receive notifications of the events, the Online switch must be enabled.

• Email: click on the switch to enable/disable the notifications by emails.

To enable the reception of notifications by email, contact Atlas Copco Service Personnel.

The notification emails are sent to the email address set in the Personal settings. To set or change the email address, refer to the paragraph Viewing/editing personal settings.