1. QA Supervisor
2. Features
3. Main Data menu
4. Joints
5. Joint report
6. Joint report filter criteria

Joint report filter criteria

• As to date: date up to which to collect the results saved by ToolsNet 8 and QA Supervisor.

Tool check

• Tools: list of the tools linked to the joint. By default, all the tools are selected. Click the Tool not to include in the Joint report.

• Inspections: list of the Cm/Cmk position based inspections linked to the selected tools, listed in the Tools box.

• Number of results (*): type the number of single results for each selected inspections. For each inspection, the last execution (on the expiry date) is retrieved.

Joint check

• Inspections: select the production inspection to include in the Joint report. Only the inspections linked to the joint are shown.

• Number of results (*): type the number of measures to retrieve for each inspection used in the Joint report. For each inspection, the last execution (on the expiry date) is retrieved.

Production data

• Tightening programs: select the production programs to include in the Joint report.

  This box lists the production programs for which at least a result exists for the selected tools.

• Number of results (*): type the number of tightening results for each tightening program. For each inspection. the results of the last execution are shown.

• Sampling frequency (*): type the frequency of the results using in the Joint report statistics.

  • Sampling frequency = 1: all the results are considered.

  • Sampling frequency = 2: one result every 2 results is considered.

  • Sampling frequency = X: one result every X results is considered.