1. QA Supervisor
2. Features
3. Main Data menu
4. Joints
5. Joint report
6. Joint report preview

Joint report preview

After setting the Joint report filters, on the upper-right corner of the Joint report filters card, click the Apply button.

The Joint report preview card opens.

The card is divided in different sections:

• Graphs for torque and angle that display the results of the last test run for all the selected inspections (tool check, joint check and Pset from the production). The red dashed line represent the limits defined in the selected joint check inspection.

• Cm/Cmk: for each tool check inspection, the general information (results data, measuring device, target object, result status), graphs of the last test run and of the deviation from the normal distribution, and the statistics about the inspection are shown.

• Cp/Cpk - SPC: for the selected joint check inspection, the general information (results data, measuring device, target object, result status), graphs of the last test run and of the deviation from the normal distribution, and the statistics about the inspection are shown.

The general information and the statistics are displayed only for the quality inspections (not for the production results).

If a measure is NOK, the normal distribution and the probability plot chart are not displayed.