Operational hazards
Instruct all intended users of the balancer before use. Inform users of the potential hazards
Operation of the balancer may take place only on the load and is strictly prohibited at the Wire stop buffer (4) and at the Wire clamp (5) due to the risk of crushing.
The suspended load can be moved in the area of the cable extension range by hand-guided pulling or pushing.
Without further external influences, the load remains in the required position.
Perform a visual inspection each day prior to use. Inform your supervisor if any incorrect operations occur. Examples of incorrect operation can be:
The suspended load cannot be removed or the working range of the balancer cannot be fully utilized.
The balancer does not balance the attached load.
