Configuring the Date and Time

The date and the time must be set in order for events and results to get the correct time stamp for when they occurred. To configure the date and time, go to the Settings tab, select Preferences on the left pane and go to the Date and Time window.

The time is retrieved from one of three available sources:

  • Manual

  • NTP

  • ToolsNet

When the source is set to Manual the date, time, and time zone are set manually.

When the source is set to NTP, the date and time is retrieved from an NTP server defined in the GUI.

When the source is set to ToolsNet, the date and time is retrieved from the ToolsNet server.

Parameters to set date and time

Field

Description

Source

Source to retrieve the time from.

Date

Date entered manually if the source is set to manual.

Time

Time entered manually if the source is set to manual.

Time zone

The time zone; either the location or a standard time zone such as UTC (coordinated universal time)

NTP Server

IP-address of an NTP server providing date and time for the controller.