EM Stop Connector Configurations
The following EM Stop connector configurations are possible:
EM Stop entry configuration.
EM Stop bypass configuration.
EM Stop loopback configuration.
EM Stop Entry Configuration
EM Stop button connector: Phoenix, 10-pin headers 3.5 mm pitch.
Use the following pin configuration:
Pin | Pin name | Use |
|---|---|---|
1 | EM_NC1 | Attach a reset button between pin 1 and 2. |
2 | EM_STOP+ | See pin 1. |
3 | EM_STOP+ | Attach an emergency button between pin 3 and 4. |
4 | 24V_ISOL_EXT | See pin 3. |
5 | EM_STOP- | Do not use. |
6 | GND | Attach an emergency button between pin 6 and 7. |
7 | EM_BYPASS_STOP- | See pin 6. |
8 | EM_BYPASS_NC | Connect a jumper between pin 8 and 9. |
9 | EM_RESET_IN | See pin 8. |
10 | EM_NC_2 | Do not use. |
EM Stop Bypass Configuration
EM Stop I/O cable connector: Phoenix, 10-pin
Remove plug or use the following pin configuration:
Pin | Pin name | Use |
|---|---|---|
1 | EM_NC1 | Do not use. |
2 | EM_STOP+ | Do not use. |
3 | EM_STOP+ | Do not use. |
4 | 24V_ISOL_EXT | Do not use. |
5 | EM_STOP- | Do not use. |
6 | GND | Do not use. |
7 | EM_BYPASS_STOP- | Do not use. |
8 | EM_BYPASS_NC | Do not use. |
9 | EM_RESET_IN | Do not use. |
10 | EM_NC_2 | Do not use. |
EM Stop Loopback Configuration
EM Stop I/O cable connector: Phoenix, 10-pin
Use the following pin configuration:
Pin | Pin name | Use |
|---|---|---|
1 | EM_NC1 | Do not use. |
2 | EM_STOP+ | Do not use. |
3 | EM_STOP+ | Do not use. |
4 | 24V_ISOL_EXT | Do not use. |
5 | EM_STOP- | Connect a jumper between pin 5 and 7. |
6 | GND | Do not use. |
7 | EM_BYPASS_STOP- | See pin 5. |
8 | EM_BYPASS_NC | Connect a jumper between pin 8 and 10. |
9 | EM_RESET_IN | Do not use. |
10 | EM_NC_2 | See pin 8. |
