1. Power Focus 6000
2. Configuration
3. Working with the Configurations Tab
4. Tool Configuration
5. Configuration of the Direction Switch

Configuration of the Direction Switch

The direction switch on the tool can be configured to trigger certain input signals when switched quickly (with a duration of 500 ms) from clockwise (CW) to counter clockwise (CCW) and back, or vice versa.

Systems in Remote start

When the system uses remote start and the user wants to trigger a signal assigned to a direction switch in Tool configuration, one needs to assign the respective signal and use the signal 10029 - Select Loosening with a required duration of 500 ms to trigger it. For this to work, an extra configuration step in ToolsTalk is needed. Under Hardware configuration in ToolsTalk, a configuration must be set for the tool by clicking on the tool icon.