Entering and Leaving Signals
The parameters for entering and leaving signals are the same.
There are two types of signals: Boolean and integer/string type. For Boolean type signals, an on/off (true/false) switch is used. For integer/string type signals, a text field is used where the (I/O) signal or string can be indicated.
Signal | Type | Default value |
|---|---|---|
Abort sequence | Boolean | Off |
Acknowledge events | Boolean | Off |
Activate tool scanner | Boolean | Off |
Clear results | Boolean | Off |
Disable Fieldbus | Boolean | Off |
Disable Open Protocol Commands | Boolean | Off |
Disable Tool scanner | Boolean | Off |
Dynamic batch size | Integer | 0 |
External identifier | Integer | 0 |
External monitored [1-8] | Boolean | Off |
Flash Tool Green Led (external protocol) | Boolean | Off |
Generic IO [1-10] | Integer | 0 |
Id for dynamic batch size | Integer | 0 |
Reset batch | Boolean | Off |
Reset batch sequence | Boolean | Off |
Reset bistable relay | Boolean | Off |
Reset Too Many NOK | Boolean | Off |
Select input | Integer | 0 |
Set bistable relay | Boolean | Off |
Unlock tool on complete | Boolean | Off |
Unlock tool on disable | Boolean | Off |
