Configuring Result Presentation Settings

On the Home view, select the Configurations tab. Then, on the left, select General Virtual Station.

In the wanted Configuration window, select Edit.
The Edit Configuration screen appears.

In the Result Presentation Settings window, set the relevant switches to ON or OFF depending on the wanted results.

If the Show PrT Compensation Value on Live Result switch is set to ON, the Live Results window displays the PrT compensation value.

If the Show Final Torque with PrT Compensation switch is set to ON, the Live Results window displays the final torque with the PrT compensation included.

Setting the switches in the Results Presentations Settings window to either ON or OFF has no impact unless:

• The multistep program has a tightening step including a Prevailing Torque step monitor with the Compensation switch set to ON.