Tightening Running
Name in SoftPLC: CYCLE_STATUS_RUNNING_TIGHTENING
Value Type | Size Min [bit] | Size Max [bit] |
|---|---|---|
Boolean | 1 | 1 |
Table of Contents
- Introduction
- loading...
- Installation and Upgrade
- loading...
- Configuration
- Working with the Tightening Tab
- loading...
- Working with the Batch Sequence Tab
- loading...
- Working with the Sources Tab
- loading...
- Working with the Tool Tab
- loading...
- Working with the Virtual Station Tab
- loading...
- Working with the Configurations Tab
- loading...
- Working with the Controller Tab
- Intelligent Application Module
- Software
- loading...
- Hardware
- loading...
- Export/Import
- loading...
- StepSync
- StepSync User Interface
- Configuring StepSync
- Setting up StepSync (hardware)
- StepSync Tightenings
- StepSync Results
- StepSync Signals
- Input Signals
- Output Signals
- Input Signals: Sub-signals
- loading...
- Output Signals: Sub-signals
- Bolt Tightening Status - 79: Sub-signals
- loading...
- Channel Tightening Status - 80: Sub-signals
- All Signals
- Cycle Running
- In Selected Mode
- Inhibited
- Last Cycle Angle High
- Last Cycle Angle Low
- Last Cycle Hardware Error
- Last Cycle Inhibited
- Last Cycle NOK
- Last Cycle Not Included
- Last Cycle OK
- Last Cycle Terminated By Other
- Last Cycle Timeout
- Last Cycle Torque High
- Last Cycle Torque Low
- Last Loosening NOK
- Last Loosening OK
- Last Tightening NOK
- Last Tightening OK
- Loosening Running
- Running Repair
- Running Termination
- Tightening Running
- Tool Led Mirror Green
- Tool Led Mirror Red
- Tool Led Mirror Yellow
- Waiting To Continue
- Channel Hardware Status - 81: Sub-signals
- loading...
- Tool Box for StepSync
- StepSync CAN Accessories
- Working with the Settings Tab
- loading...
- Operation
- loading...
- Reports and Statistics
- loading...
- Troubleshooting and Service
- loading...
- Reference
- loading...
- Glossary
- Video Gallery
- loading...
Smart Connected Information
