Configuration options
The table below shows the options for BSP and NPT configuration with applicable attachments.
For Ordering No see section Accessories. For installation instruction see section Operation.
Pos. | Item | Sanding, BSP | Sanding, NPT |
|---|---|---|---|
1 | Backing pad | Ø 180mm | Ø 7” |
2 | Fibre disc | ||
3 | Nut locking backing pad | M14 | UNC 5/8”-11 |
Service tool | Face spanner, CC.30 × Ø 5 mm | Face spanner, CC.30 × Ø 5 mm | |
4 | Locking kit | Accessory included, M6 × 20 | Accessory included, UNC 1/4” |
Service tool | Hexagon key, 4mm | Hexagon key, 4mm | |
Recommended torque | 15 Nm | 11 ftlb |
