1. Power Focus HC
2. Configuration
3. Web GUI
4. Working with the Sources Tab
5. Source Tightening

Source Tightening

The tightening menu shows a list of source tightening configurations. Separate lists can be linked to a Virtual Station by going to the Virtual Station in question, and choosing Task, Change task. There, a Source can be chosen as a task. Source tightenings link a specific tightening program to an identifier number. When the identifier is sent to the controller via external open protocol client the linked program will run.

Source Tightening lists can be set either in Control or Confirm mode.

When set to Control (not supported for PFHC), an external source selects a tightening program by requesting an identifier number.

In Confirm mode, the program numbers are linked to a source tightening program.

Product Essentials Tutorials

https://www.youtube.com/watch?v=vVAaKtp3O5k