Batch Bolt Service

  1. On the Home view, go to Tasks > Batch Bolt Service.

  2. Select a program to run by using the up and down buttons to navigate through the list and the Enter button in the middle to confirm the choice.

    The name presented in the list is taken from the Name field under General Settings > Properties tab.

  3. Select one of the two choice as applicable: Tower Section ID or Tower Data.

  4. Scan the flange identifier.

    • Scan or enter manually the Tower Section ID which is the reference for the specific flange. This identifier is needed to generate the result report since it is used to group the results that belong to a specific flange.

      For more information about how to use keypad buttons on the hand controller, see section GUI Buttons and Icons.

    • Scan or enter manually the Tower Data QR code if it is available. This string is a semicolon separated list that includes tower section ID and some additional data added to the results. Hand controller verifies the format of this string and generates error message if it is not approved.

  5. Scan the optional job metadata that is included in the results:

    • Scan Operator Data

    • Scan Operator Company

    • Bolt Data

    • Flange Location

    • Operator ID

    • Operator Data

    • Operator Company

  6. Press the Forward button to continue.

  7. Enter total number of bolts on the flange even if the intention is to do a subset of the bolts.

    For more information about how to use keypad buttons on the hand controller, see section GUI Buttons and Icons.

  8. Press the Forward button to enter the summary screen.

    The summary screen shows the name of the program to run and the number of bolts.

  9. Press the Forward button to start the bolt service operation.

    When resuming a previously started batch job, the results of each bolt service appears as green (OK) or red (NOK) on the Position tool on bolt screen.

  10. If the bolt number is not correct, edit it by using the More button.

    It is the responsibility of the user to make sure that the bolt number is correct.

  11. Press the Forward button to start bolt service operation, see section Bolt Service Operation under Bolt Service.

Relevant Information