Stored Results View
The hand controller stores the result for every tightening or loosening performed.
View Stored Results
Go to Reports in the home menu and select Results in the left pane.
Select View all results. The result list will show information about the following:
Date: date and time the tensioning was performed.
Tightening Program: Tightening Program column shows Multistep Tensioning Program name.
Force: measured force during tensioning.
Pressure: measured pressure during tensioning.
Result: Torque / Angle result.
Limits: Torque range, angle range and pressure range for an OK result. In NOK results the violated range limit is highlighted with red text.
Results marked with a red bar have status NOK.
