Configuration of the Network
The Power Focus XCPower Focus XC can be set up for access from the Atlas Copco software ToolsTalk or from a web browser on a Local Area Network (LAN). It can also be accessed directly from a connected PC. It uses the IPv4 protocol.
![](../../../media/A8/15975720843__Web.png)
To access and alter the Ethernet settings, select Edit.
![](../../../assets/img/ac-note-icon-2.png)
Only the Factory Ethernet port can be configured. The Service Ethernet port has a designated IP address, 169.254.1.1, that must not be connected to the local network.