Changing the roller bearings
Required tools
Allen keys or bits 4-10 mm
Screw bits and sockets
Torx® keys or bits T6-T25
Torque wrench
Lifting device
Screwdrivers
Pliers
Bearing puller (optional)
Feeler gauge
Lubricant | Description |
|---|---|
Klüberlub® BE 71-501 | http://www.klueber.com/en/product-detail/id/404/ |
Place the press on a horizontal surface.
Disassemble all the screw housing cover screws.
Disassemble the screw housing cover.
Disassemble the guide rollers and the shim (3x).
Disassemble the roller bearings (3x).
Discard the used roller bearings.
Assemble the new roller bearings (3x).
Apply a thin layer of grease (Klüberlub® BE 71-501) on all parts.
Assemble the guide rollers and the shim (3x)
Apply a thin layer of grease (Klüberlub® BE 71-501) on all parts.
Assemble the screw housing cover using the screws.
