Assembling the gearbox
Required tools
Allen keys or bits 4-10 mm
Screw bits and sockets
Torx® keys or bits T6-T25
Torque wrench
Lifting device
Screwdrivers
Pliers
Bearing puller (optional)
Feeler gauge
Lubricant | Description |
|---|---|
Klüberlub® BE 71-501 | http://www.klueber.com/en/product-detail/id/404/ |
Required spare parts
Bearings (x6)
Assemble the bearings on both sides using a press and support (x6).
Only press and support on the bearing inner rings.
Apply a thin layer of grease (Klüberlub® BE 71-501).
Assemble the guide rings.
Assemble the preload washers into the top cover.
Assemble the top cover using new screws.
Tighten the screws crosswise, first to 50% torque, then to 100% torque. Torque according to Installation overview.
Assemble the brake pic. 6-7 (CBUL press only).
