Installing the charger

The MTRwrench cradle can be installed both horizontally and vertically, on a tabletop or in a cabinet.

 

 

  1. Slide the horns of the mounting plate (1) into the corresponding holes in the bottom of the MTRwrench cradle.

    • The vertical mounting plate (1) has slotted holes for mounting onto walls, tabletops or cabinets.

    • Make sure the mounting is stable and secure.

  2. Remove the screw cover (4).

  3. Install the washer (2) and the screw (3) into the hole and tighten at a torque of 1.5 Nm.

  4. Install the screw cover (4).