1. Power Focus XC
2. Configuration
3. Web GUI
4. Working with the Configurations Tab
5. General Virtual Station
6. Configuring Result Presentation Settings
7. Show Final Torque with PrT Compensation: ON / Show PrT Compensation Value on Live Result: OFF

Show Final Torque with PrT Compensation: ON / Show PrT Compensation Value on Live Result: OFF

Show Final Torque with PrT Compensation: ON

The Live Result window shows the Final Torque with the PrT compensation value included.

If the eHMI and ST Selector are on and configured, they show the Final Torque with the PrT compensation value included.

Show PrT Compensation Value on Live Result: OFF

The Live Result window does not display the PrT compensation value and the related compensation icon ().

Configuring the Show Final Torque with PrT Compensation and Show PrT Compensation Value on Live Result switches does not impact:

• The final torque values sent to ToolsNet and ToolsTalk: the final torque values with PrT compensation are always sent to ToolsNet and ToolsTalk.

• The final torque value displayed with the historical results.

• The traces based on live and historical results.

• The values in Open Protocol messages.

• The signals.

• The protocol adapters.