General
Connect the screw feeder to the mains using the delivered power supply.
Connect the external output signal line, as required.
DC maximum: 100 mA
Externally applied voltage 5 - 24 V
Max cable length: 3 m
OFF when no screw is present
ON when screw is present
Before delivery, each section of the machine is checked and adjusted with panhead screws matching the nominal diameters of the ordered model.
Most screws may be usable in the initial status of adjustment however, if the height or shape of the screw head is different or if the operation is regarded as abnormal, each section must be readjusted. If this is the case, make checks and adjustments according to the Maintenance section.
