Basic Tool Operation
Wear PPE – Correct & appropriate safety equipment must be worn.
Connect hoses - Ensure all hose connections are secure and correctly made. Confirm hoses are free from defects.
Cycle the tool – Place the tool on a flat surface, turn pump on. Press the ADV button on the pump remote until tool clicks. Release, wait for tool to click. Repeat.
Set pressure – Press the ADV button and slowly turn the pressure regulator clockwise to reach the correct pressure.
For optimum performance:
Frequently inspect tool, power pack, hoses, connectors, electric cables and accessories for visual damage. Always follow instructions for tool and pump maintenance.
For optimum safety:
Always perform a task based risk assessment prior to tool/system use.
