1. LSV19 S170-08
2. Operation
3. Configuration instructions
4. Lever assembly options

Lever assembly options

WARNING

Risk of injury

• Always shut off air supply, drain hose of air pressure and disconnect tool from air supply when not in use, before changing accessories or when making repairs.

• Always wear protective gloves when changing accessories or when making repairs.

The lever can be turned from the top side to the underside of the tool.

1. Remove the handle using a slotted screwdriver.

2. Attach the tool in a vice.

3. Remove the trigger pin with bushing using a 9 mm socket.
   Remove the adapter using a 15 mm socket.
   Remove the inlet/outlet parts.

4. Remove the insulation sleeve.

5. Move the cover to the opposite side of the casing.
   Put the insulation sleeve back in position and turn it to attach it to the casing.

6. Assemble the inlet/outlet parts.
   Make sure the inlet is positioned correctly relative to the trigger pin bushing.
   Apply Loctite to the bushing threads.
   Attach the bushing loosely by hand.
   Tighten the adapter using a 15 mm socket and torque wrench.
   Tighten the trigger pin bushing using a 9 mm socket and torque wrench.

7. Attach the lever in the opposite position.