Installing the Inserts and Guide Bearing
WARNINGRisk of injury
-
Always shut off air supply, drain hose of air pressure and disconnect tool from air supply when not in use, before changing accessories or when making repairs.
-
Always wear protective gloves when changing accessories or when making repairs.
Required tools:
Torx key T15
Select the appropriate guide bearing and inserts. See table in section Configuration options.
Press the lock mechanism and use the torx key to tighten the inserts.
Place the guide bearing into position.
Press the lock mechanism and use the torx key to tighten the guide bearing.
CAUTIONRisk of injury
-
Ensure that the lower corner of the inserts are always covered by the guide bearing before using the tool.
