Cleaning the adapter with strainer
WARNINGRisk of severe injury
Air under pressure can cause injury.
Always shut off the air supply when not in use or before any adjustments.
Drain the hose of air pressure and disconnect the tool from air supply when not in use or before any adjustments.
Always use the correct hose size and air pressure for the tool.
Required tools:
Vice
Torque wrench
Wrench (3/8")
Blow gun
Spare parts:
Replace the filter at every 1000-hour service.
Position the tool in a vice.
Disconnect the air adapter from the handle using a wrench.
Clean the adapter strainer using a blow gun.
Replace the adapter with strainer if any damage or malfunction is detected.
Assemble the cleaned or new adapter with strainer with the o-ring.
Fit the adapter with strainer in the handle and tighten using a wrench to recommended torque.
