Assembling the Chuck
Place the tool in the plastic clamps.
Put the plastic clamps (4080 1133 80) with the motor and handle to a vise.
Assemble the front part of the motor.
Tighten to 30 Nm, left threaded. Use adjustable spanner 4080 0848 80.
Place the tool in the plastic clamps.
Put the plastic clamps (4080 1133 80) with the motor and handle to a vise.
Assemble the front part of the motor.
Tighten to 30 Nm, left threaded. Use adjustable spanner 4080 0848 80.
