Configuration of the Multiple Transducers

Only available for QST and IxB tools.

Depending on the tool type and the number of transducers, it is possible to set how the torque and angle transducers are used in a tightening. The transducers can be configured to be controlling or monitoring.

Multiple transducers
Parameter	Description
Controlling torque transducer	Set the torque transducer to use for tightening. Available settings: Auto: For QST tools, Torque is used by default. For IxB tools, Torque 2 is used by default. If Torque 2 is not available for the IxB tool type, Torque is used. Torque Torque 2
Controlling angle transducer	Set the angle transducer to use for tightening. Available settings: Auto: For QST tools, Motor angle is used by default. Motor angle Angle Angle 2

Select Details to open a sub-menu with more settings.

Monitor and reporting torque
Parameter	Description
Report monitoring torque values	If set, a Final Torque value will be reported from both the controlling and the monitoring transducer, including evaluation of the status for both (OK/High/Low).
Redundancy error reporting torque	Redundancy error is reported if the Final Torque measured on the controlling transducer differ from the value measured on the monitoring transducer.
Lock the tool on redundancy error	Lock the tool if a redundancy error is detected.

Torque transducer misc settings
Parameter	Description
Require dual torque	If set, the connected tool must have dual torque transducers (that are not disabled) to be able to run a tightening.
Monitoring torque in trace	If set, the values from the monitoring torque transducer are included in the trace.

Dual torque restrictions
Parameter	Description
Enable double torque restriction	If set, the double torque transducer restriction is active.
Maximum torque difference	The limit for the double torque difference restriction.

Monitor and reporting angle
Parameter	Description
Report monitoring angle values	If set, a Final Angle value will be reported from both the controlling and the monitoring transducer, including evaluation of the status for both (OK/High/Low).
Redundancy error reporting angle	Redundancy error is reported if the Final Angle measured on the controlling transducer differ from the value measured on the monitoring transducer.
Lock the tool on redundancy error	Lock the tool if a redundancy error is detected.

Angle transducer misc settings
Parameter	Description
Require dual angle	If set, the connected tool must have dual angle transducers (that are not disabled) to be able to run a tightening.
Monitoring angle in trace	If set, the values from the monitoring angle transducer is included in the trace.

Dual angle restrictions
Parameter	Description
Enable double angle restriction	If set, the double angle transducer restriction is active.
Maximum angle difference	The limit for the double angle difference restriction.