Start Source

Use the tool start source to set how to start the tool. The default value is Trigger only.

Start Source is available only for certain tool types.

Options for start source

Start source

Description

Trigger only

Press the tool trigger to start the tightening.

Trigger OR Push

Press the tool trigger or push the tool against the joint to start the tightening.

Trigger AND Push

Press the tool trigger and push the tool against the joint to start the tightening.

Trigger AND Digital input

Have a signal using digital input and press the tool trigger to start the tightening.

Push only

Push the tool against the joint to start the tightening.

Safety trigger

Two triggers (as with trigger and push) activated within 500 ms from each other to start the tightening.