1. RRH06P
2. Service
3. Lubrication Instructions
4. Lubrication

Lubrication

When the riveting hammer is in use, it should be oiled once per shift. The oil (fluid type), which should be applied in an amount of 1 cm³, can be dropped into the air hose. When the machine is in continuous service, installation of an Atlas Copco oil-fog lubricator is recommended.

An excessive amount of oil will prevent the main valve from functioning. It is therefore vitally important to lubricate in strict accordance with the recommendations.

Use lubricants of good quality. The oils and grease delivered by the oil companies mentioned in the table are examples of lubricants which are recommended.