Configuration of the Synchronized Tightening

Power Focus S can be configured in two different Synchronized Tightening modes:

  • Sync member. This mode is used when the system is connected to a Power Focus 8 through a daisy chain connection. The Power Focus S should be set to Sync member mode, and the Power Focus 8 should be set to Sync reference mode.

  • No sync. This mode is used when the system is connected to ToolsControl through the Factory Ethernet port.

Changing the Mode

  1. Go to the Settings tab on the home screen. Select Synchronized Tightening.

  2. Select the ellipsis icon (...) on the right. The Choose an item pop-up window opens.

  3. Select the preferred mode in the Choose an item pop-up window. Confirm by selecting Apply.

In Sync member mode, the Channel number field will appear. This number sets the channel number of the system when connected to a Power Focus 8.

The system will automatically reboot once the mode change is applied.