Custom View

The custom view makes it possible to customize the last view on the controller. The selected information will only be displayed during the selected Pset. If no Pset is selected the screen will be blank.
The screen can be configured to show one to four fields. For each field it is possible to display general or step information.

The first field have a white background, the following have grey background. This is to give a focal point and have no other intended meaning.

General data

Parameter	Description
Final torque	Shows the final torque of the tightening. Final torque can be configured in the general settings of the Pset.
Peak torque	Shows the maximum achieved torque in the tightening.
Tracking torque	Follows the torque during the tightening.
Final angle	Shows the final angle of the tightening. Final angle can be configured in the general settings of the Pset.
Total angle	Shows the total angle of the tightening.
Tracking angle	Follows the angle during the tightening.
Tightening error	Shows the current error message, blank if no current error.
Pset name and number	Shows Pset number and name.
Controller date	Controller date.
Controller name	Controller name (configured under Controller settings).
Station name	Station name (configured under Controller settings).
Line name	Line name (configured under Controller settings).
Logged in user	Displays if any user level is logged in (L1-L3) or "-" if no user is logged in.
Tightening duration	The time in seconds of the last tightening.
Tool serial number	The serial number of the connected tool.
Tool type	The type of the connected tool.
Calibration date	Date of last calibration.
Tool statistics	Tool statistics, displays the OK and NOK tightenings since last calibration.
Select source	Displays the source of Pset and batch sequence selections.
Controller time	Controller time.
Tool temp	Current temperature of tool.
Vacuum pressure	Displays real time vacuum pressure in kPa. Only works with Vacuum pump MT (8432 0854 00) and a controller with MTF6000 revision C or later).

Step data

Parameter	Description
Step number	Selects from which step the parameter "Step data" shall get its values from.
Step peak torque	Shows the maximum achieved torque in the selected step.
Step clamp torque	Shows the achieved clamp torque in the selected step.
Step transition torque	Shows the maximum last measured torque in the selected step.
Step angle	Shows the achieved angle for the selected step.
Step clamp angle	Shows the achieved clamp angle in the selected step.
Seating point	Shows the seating torque of the step.
Tightening angle	Shows the tightening angle for the selected step