Network Update

In the Manage connections menu double-click on Network Update to start the Network update session.

Select Save List to get a template, even if the list is empty.

Fill in the template with correct controller information:

For the controller information that is optional TTMT will collect the information from the controller if connection was successfully established.

Save List

Saves the entered controllers in a csv list that is tab separated. TTMT can read both “;” and tab separated lists.

If no controllers are added the Save List option will create a template with the correct headers that can be filled in externally.

Loads a csv file into TTMT and displays all controllers in a list.

Will check connection for each controller in the list and see if that controller is active on the network.

Status Information
	Status	Description
	Unknown	Connection has not yet been verified
	Connection error	Could not connect to the controller.
	Connection successful	Controller is active and available on the network.
	Connecting	Checking connection.

Only works with tightening controllers.

Save a network update file (*.mtpm).
1. Open wanted setup in TTMT.
2. Open Manage connections tab.
3. Select Save.
4. Set Save as type to Massupdate file (*.mtpm).
Update several controllers with new configurations.
1. Select desired *.mtpm file.
2. Select Open.

Status Information
	Status	Description
	Unknown	Connection has not yet been verified
	Error	Could not connect to the controller. Failed to update. Wrong Device type. Wrong firmware version.
	OK	Successful program update.
	Ongoing	Connecting. Updating.

When using Network update the TTMT will remove and overwrite all existing Psets, Batch Sequences and Identifiers.

Select FIRMWARE UPDATE and select a .fw file to update ALL controllers in the list with selected firmware.

Status Information
	Status	Description
	Unknown	Connection has not yet been verified
	Error	Could not connect to the controller. Failed to update. Wrong Device type. Wrong firmware version. Wrong license. Could not re-connect.
	OK	Successful firmware update.
	Ongoing	Connecting. Ongoing process.

Need to have version 3.2 or higher in order for Network update to work

Enter an IP address to add one controller to the list.

TTMT will automatically start a check connection after the IP address has been added.

Check connection for a specific controller.

Remove controller form the list.