Stacklight

Parameter

Description

Stacklight [1-5] function

Select which output function to connect to the corresponding stacklight light.

Stacklight [1-5] signal mode

Select the mode of the signal.

Not available if Stacklight [1-5] function is set to Disabled.

The options are the same as for the Digital I/O Output signal mode.

  • Tracking: Reacts on changes.

  • Until next tightening: Will be active until next tightening is started.

  • Duration: Will be active for a set amount of time.

Stacklight [1-5] signal duration

Only available if Stacklight [1-5] signal mode is set to Duration.

Stacklight [1-5] flashing

Not available if Stacklight [1-5] function is set to Disabled.

  • On: The light will be flashing.

  • Off: The light will be on.

Buzzer function

Select which output function to connect to the Buzzer.

Buzzer signal mode

Select the mode of the signal.

Not available if Buzzer function is set to Disabled.

The options are the same as for the Digital I/O Output signal mode.

  • Tracking: Reacts on changes.

  • Until next tightening: Will be active until next tightening is started.

  • Duration: Will be active for a set amount of time.

Buzzer signal duration

Only available if Buzzer signal mode is set to Duration.

Component [A,B]

  • None

  • One-way/key switch: Switch function on/off.

  • Push button: Activates function with a press of the button.

  • Color button: Activates function with a press of the button. Can also include a lamp that lights up according to the Component [A,B] lamp function.

  • Lamp: Lights up according to the Component [A,B] lamp function.

  • Two-way/key switch: Turn switch left to activate left function and turn it right to activate right function. Turn switch upright to put it in neutral state.

Component [A,B] function

Select which input function is connected to corresponding Component [A,B].

Only available if Component [A,B] is set to One-way switch, Push button or Color button.

Component [A,B] left function

Select which input function is connected to corresponding Component [A,B].

Only available if Component [A,B] is set to Two-way switch.

Component [A,B] right function

Select which input function is connected to corresponding Component [A,B].

Only available if Component [A,B] is set to Two-way switch.

Component [A,B] lamp function

Select which input function is connected to corresponding Component [A,B].

Only available if Component [A,B] is set to Color button or Lamp.

Component [A,B] lamp signal mode

Select the mode of the signal.

Only available if Component [A,B] is set to Color button or Lamp.

Component [A,B] lamp signal duration

Only available if Component [A,B] lamp signal mode is set to Duration.

Component [A,B] lamp flashing

Not available if Component [A,B] function is set to Disabled.

  • On: The light will be flashing.

  • Off: The light will be on.

Output [1-2] function

Select which output function to connect to the corresponding Output [1-2] function.

Output [1-2] signal mode

Select the mode of the signal.

Not available if Output [1-2] function is set to Disabled.

The options are the same as for the Digital I/O Output signal mode.

  • Tracking: Reacts on changes.

  • Until next tightening: Will be active until next tightening is started.

  • Duration: Will be active for a set amount of time.

Output [1-2] signal duration

Only available if Output [1-2] function is set to Duration.

Output [1-2] flashing

Not available if Output [1-2] function is set to Disabled.

  • On: The light will be flashing.

  • Off: The light will be on.

Input [1-2] function

Select which input function to connect to the corresponding Input [1-2] function..