Digital Output Step

The digital output step will set a specific signal high/low. The signal can be set until a tightening or a specific duration have been completed.

A

Signal set HIGH for a specific duration

B

Signal set HIGH until tightening is completed

Parameter

Description

Output signal

External monitored 1-10

Signal mode

  • Set – Signal will be active until changed or tightening is completed

  • Duration - Signal will be active for a set duration

Output signal will always be reset at the end of the tightening, regardless of mode.

Signal level

  • High – Signal goes high

  • Low – Signal goes low

Signal duration

Decides how long the output will be active.