Settings
Parameter | Description |
|---|---|
Fieldbus type | The type of fieldbus settings to load. The type must match with the module inside Fieldbus Carrier MT.  Support PROFINET from version 1.12.0 and EtherCAT and EtherNet/IP from version 1.16.0. |
Map size | Number of bytes to transfer to/from the controller. The value depends on selected direction in Map settings (To controller/From controller). |
Tool stop at offline | If yes, the tool will be disabled when the fieldbus connection is offline. |
Actual values set
Parameter | Description |
|---|---|
Status | Indicates the status of Fieldbus carrier MT:
Communication between the Fieldbus Carrier MT and the PLC is only available in Active status. |
DHCP enabled | Indicates if DHCP configuration is stored. (PROFINET, EtherNet/IP) |
IP Address | Indicates the IP Address. (PROFINET, EtherNet/IP) |
Subnet mask | Indicates the Subnet mask. (PROFINET, EtherNet/IP) |
Default gateway | Indicates the gateway IP address. (PROFINET, EtherNet/IP) |
Station name | Indicates the station name. (PROFINET) |
Device ID | Indicates identifier number for the device. (EtherCAT) |
Update interval | Indicates how often the fieldbus process data is updated internally. |
