Loosening
The loosening step is used to loosen or unscrew a screw.
Parameter | Description |
Loosening torque | Maximum torque allowed for a loosening. |
Loosening angle | Maximum angle allowed for a loosening. |
Loosening speed | Speed for loosening. |
Loosening max time | Maximum time for a loosening. If exceeded, the controller will display an error message. |
Loosening vacuum pump | Digital output to switch on an external vacuum pump. |
Loosening start delay | Delay from trigger to tool start. |
Force loosening on NOK | Forces the user to conduct a loosening before another tightening can be done. This feature is disabled when run from a Batch Sequence. |
