Password settings

General settings

Parameter	Description
Automatic logout time	Time before the user is automatically logged out from the controller.

Controller

The Controller table enables you to set access rights.

The four digit PIN code is set in the box below the user number. It is also possible to disable the password for a level by unchecking the Pin enabled box over the password.

Parameter	Description
Menu access	Accessing the system menu in the controller.
Change view	Changing from one result view to another.
Select Pset	Selecting Pset from the controller.
Select Batch sequence	Selecting batch sequence from the controller.
Reset tightening error	Acknowledging tightening errors.
Reset Batch sequence error	Acknowledging batch sequence errors.
Abort Batch sequence	Reset a batch sequence.
Increment/decrement Batch sequence	Increase or decrease batch sequence step counter.
Increment/decrement batch	Increase or decrease batch counter.
Quick programming	Quick programming access.
Select source	Change select source
Tool control	Start/stop tool
Import settings	Import controller settings (Controller parameters, Pset, batch sequences, Identifiers and I/O settings )via USB flash drive.
Import software	Update the software.
Export settings	Export controller settings (Controller parameters, Pset, batch sequences, Identifiers and I/O settings ) to USB flash drive.
Export results	Export results as CSV-file to USB flash drive.
Export graphs	Export graphs to USB flash drive.
Export all	Export everything to USB flash drive.
Export software	Export software to USB flash drive.
Export Event	Export events to USB flash drive.
Controller information	Access of controller information menu.
Tool information	Access of tool information menu.
Battery info	Access of battery information menu.
Connection info	Access to connections menu.
IP configuration	Access of IP configuration menu.
ToolsNet configuration	Access of ToolsNet configuration menu.
Digital I/O	Access of Digital I/O information menu.