Assembling the Chuck
Place the front part module in the plastic clamps (4080 1133 80) and put it in a vice.
Use a 15 mm spanner (4006 3597 00) and an adapter in the chuck.
Tighten the chuck to 10 Nm.
![](../../../media/EF/12086561547__Web.png)
Place the front part module in the plastic clamps (4080 1133 80) and put it in a vice.
Use a 15 mm spanner (4006 3597 00) and an adapter in the chuck.
Tighten the chuck to 10 Nm.