1. ETV STR31-15-10
2. Installation
3. Installation Instructions
4. Fixtures for Tensor angle type models
5. Customer-developed fixturing equipment
6. For torque between 100 and 200 Nm

For torque between 100 and 200 Nm

ST/STR equipment primarily:

• Fit the clamp holding the equipment around the gearbox.

• The clamp should be located as close as possible to the front nut of the tool.

• The clamp width should be between 15 and 20 mm.

ES equipment primarily:

• Fit the clamp around the motor.