Single Controller without Emergency Stop Button
Connector: Phoenix, 6-pin Headers 3.5mm pitch
WARNINGRemote start switch must be set to OFF for this configuration
Use the following PIN configuration: | ||
|---|---|---|
Pin | Use |
|
1 | Do not use |  |
2 | Do not use | |
3 | Connect a jumper between pin 3 and pin 4 | |
4 | See pin 3 | |
5 | Connect a jumper between pin 5 and pin 6 | |
6 | See pin 5 | |
7 | Connect a jumper between pin 7 and pin 8 | |
8 | See pin 7 | |
9 | Connect a jumper between pin 9 and pin 10 | |
10 | See pin 9 | |
