Wheel configuration options

The table below shows the configuration options for diffrent wheel types with applicable attachment parts.

For Ordering No please see section Spare part list and Accessories. For installation instruction of wheel please see section Operation.

Pos.	Item	A. Grinding	B. Grinding	C. Cutting-off
1	Adapter locking autobalancer	Ø 42 mm, 5/8-11 UNC	Ø 42 mm, 5/8-11 UNC	Ø 42 mm, 5/8-11 UNC
2	Wheel	Type 27, Type 42	Type 527	Type 41
	Max diameter	125 mm, 5”	125 mm, 5”	125 mm, 5”
	Thickness	0.5 - 7.0 mm	0.5 - 7.0 mm	0.5 - 7.0 mm
	Hole diameter	7/8”	5/8”	7/8”
	Peripherical speed	80 m/s	80 m/s	80 m/s
3	Nut locking grinding wheel	Ø42 mm, 5/8-11 UNC	Not applicable	Ø42 mm, 5/8-11 UNC
	Service tool	Face spanner CC.30 × Ø 5.5 mm	Face spanner CC.30 × Ø5.5 mm	Face spanner CC.30 × Ø5.5 mm
	Recommended torque	14.7 ftlb (20 Nm)	14.7 ftlb (20 Nm)	14.7 ftlb (20 Nm)