Accessing the Web Interface

The Web Interface is almost identical to the touch screen of the ILT Base Station. This makes it possible to configure and program the ILT Base Station by using a web browser on a computer.

  1. Connect the computer to the network, using an Ethernet cable.

  2. Connect the Ethernet port (RJ45) on the Power Focus 6000 to the network, using an Ethernet cable.

  3. Configure the computer and the Power Focus 6000 so they are connected to the same network.

  4. Open the Google Chrome web browser and enter the IP address of the ILT Base Station.

    Google Chrome is the recommended web browser to use for the ILT Web Interface.

Finding the IP address of the ILT Base Station

On the ILT Base Station Home screen, select Network and then select IP address.

ILT Base Station | C2450001 - | 8436677000

Published: 2021-03-09

© Atlas Copco Industrial Technique AB, 2021 | Legal Notice