Turning On the Wrench

  1. On the back of the MTRwrench 200 HMI, pull back the locking lever on the battery housing's door and open the door.

  2. Insert the battery into its housing.

    Make sure that the lace edge is visible to make removal easier.

  3. Close the battery housing's door.

    Make sure that the edge of the lace is still inside.

Once the MTRwrench 200 is on, the Progress LEDs on the HMI start blinking with white light to notify that the MTRwrench 200 requires a zero adjustment.

The Radio Communication LED on the HMI starts blinking to notify the MTRwrench 200 wireless communication is on.

Relevant Information