Calibrating the touch screen
For Industrial PCs with a Serial number from 8066 to 8548 follow these instructions:
Requirements | |
|---|---|
Software | UDDP |
Hardware | External USB keyboard with a built-in trackball |
Localisation | Desktop |
Particularity | Running in Administrator mode |
Connect an external USB keyboard for the purpose of calibration. Navigate to the Windows Start menu > All Programs > UDDP > Kalibrieren.
Press the touch screen in the middle of the black cross. As you release, a green check appears if the calibration point is captured. Repeat this procedure sequentially for each of the four crosses.
For Industrial PCs with a Serial number from 8549 follow these instructions:
Requirements | |
|---|---|
Software | Windows control panel |
Hardware | External USB keyboard with a built-in trackball |
Localisation | Desktop |
Particularity | Running in Administrator mode |
Navigate to Windows > Start > Control Panel > Hardware and Sound > Tablet PC Settings.
Press the “Calibrate…" button. Press the touch screen in the middle of the cross. Repeat this procedure sequentially for each appearing cross until the calibration process is completed.
