Assembling the Industrial PC
Only appropriately qualified personnel may assemble and operate this device.
Only suspended and raised assembly is permissible.
The bracket is assembled as follows:
Screw in rotating joint (a) to the mounting profile (b) (e.g. Rittal CP 60), using the four to eight screws enclosed with the rotating joint. Remove the cover of the connection console by loosening the three screws.
Then screw together the disassembled connection console (c) with the rotating joint (a). Four screws for this purpose are also included on delivery with the rotating joint.
Preassemble both the top screws first. The original size of these screws is M6x18. The distance between the Panel PC and screw head should be around 13mm. Mount the Panel PC. Then install the two lower screws and tighten all four screws.
Assembled front and side view.
Once all cables have been connected to the Industrial PC, re-position the cover of the connection console in place.
Suspended assembly:
Raised assembly:
