Wheel configuration options

The table below shows the configuration options for diffrent wheel types with applicable attachment parts.

For Ordering No please see section Spare part list and Accessories. For installation instruction of wheel please see section Operation.

Pos.	Item	Grinding	Cutting-off	Wheel brush
1	Nut locking the autobalancer	Ø 58 mm	Ø 58 mm	Ø 58 mm
2	Wheel	Ø 180 mm, 7”	Ø 180 mm, 7”	Ø 180 mm, 7”
	Type	27, 42	41	X1
	Thickness	max 10 mm	max 10 mm	max 10 mm
	Hole diameter	22 mm	22 mm	22 mm
	Peripherical speed	80 m/s	80 m/s	80 m/s
3	Nut locking the wheel	Ø 41 mm	Ø 58 mm	Ø 58 mm
	Service tool	Face spanner cc 30 × 5.5 mm	Face spanner cc 30 × 5.5 mm	Face spanner cc 30 × 5.5 mm
	Recommended torque	15 Nm	15 Nm	15 Nm
4	Locking kit
	Service tool	Hex key 4 mm	Hex key 4 mm	Hex key 4 mm
	Recommended torque	15 Nm	15 Nm	15 Nm

Pos.	Item	Backing pad
1	Adapter locking the autobalancer	Ø 50 mm
2	Backing pad	Ø 180 mm, 7”
	Thickness	20 mm
	Thread	UNC 5/8
	Peripherical speed	80 m/s
	Service tool	Face spanner cc 30 × 5.5 mm
	Recommended torque	15 Nm
3	Locking kit
	Service tool	Hex key 4 mm
	Recommended torque	15 Nm